Golden-lighting 3086-3/6/9 CH Bedienungsanleitung PDF herunterladen

Assembly Instructions: 3086-3/6/9 CH (Harland)

IMPORTANT:

• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.

• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!

• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!

PREPARING FOR INSTALLATION

Carefully remove all of the contents from the carton. See the

important notes above. Shut off the power at the circuit breaker

andcompletelyremovetheoldxturefromthewall,including

theoldmountingstrap.

Fromthepartsbagremovethemountingstrapassembly.One

endofnipple(F)shouldbeattachedtomountingstrap(A)with

hexnuts(C,D)inplace.Theotherendshouldhavecanopyloop

(H) attached.

Attachmountingstrap(A)tothejunctionboxusingmounting

screws(B)andascrewdriver.Tightensecurely.Unscrewcanopy

loop collar (I) from canopy loop (H). Pass canopy (G) over the

mountedcanopylooptotesttheheight.Approximatelyhalf

ofthecanopyloop’sexteriorthreadsshouldbeexposed,and

thecanopyloopcollarshouldtsnuglyontothecanopyloop.

Removecanopy(G)andadjusttheheightofnipple(F)and

canopyloop(H)untilthedesiredheightisreached.

ASSEMBLING THE FIXTURE

Attachthehookofoneendofrope(P)torings(S)onxture

body(N).Attachtoploop(L)tonipple(T)ofxturebody(N).

Haveanassistantholdthetoploopassembly,thenhookthe

freeendofrope(P)totheholeslocatednexttonipple(T).

Bymeasuring,determinethecorrectlengthofchainneededfor

properhangingheight.Ifnecessary,useapairofplierstoopen

andremoveanyexcesschain.Attachoneofchainconnectors

(K)tochain(J).Passthexturewiresthroughtoploop(L).Pull

the wires until taut. Attach one end of chain connector (K) to top

loop(L)andclosechainconnector(K).Feedthexturewires

upthroughthechain(everythreelinksorso),pullingthewires

until taut. Use the free chain connector (K) to attach chain (J)

to canopy loop (H). Slide canopy loop collar (H) and canopy (G)

down onto the chain/wires. Pull the wires until taut. Trim the

wirestothedesiredlengthplus8to10inches.

CONNECTING THE WIRES

Haveanassistantsupportthextureweightwhilecompleting

thewiring.Cutawayexcesswire.Threadthexturewires

throughcanopyloop(H)andcanopy(G).Attachthexture’s

wirestothepowersupplywiresfromthejunctionbox.Connect

blacktoblack(orsmooth);whitetowhite(orribbed);ground

toground(greenorcopper).Twisttheendsofthewirepairs

together,thentwistonawireconnector.Makesurealltwistsare

inthesamedirection.Ifthereisnogroundwire(greenorcopper)

fromthejunctionbox,locategroundscrew(E)onmounting

strap(A)andwrapthexturegroundwirearoundthegreen

groundscrew(E).Useascrewdrivertosecuregroundscrew(E)

ontothemountingbracket.Tuckallwiresneatlyintothejunction

box.

FINISHING THE INSTALLATION

Pushcanopy(G)uptotheceilingandslidecanopyloopcollar

(I)upbeneaththecanopy.Tightlythreadcanopyloopcollar(I)

onto canopy loop (H) to secure canopy (G) in place.

Installlightbulbs(M)(notincluded)inaccordancewith

thexture’sspecications.Donotexceedthemaximum

recommendedwattage.

Your installation is now complete. Turn on the power and test

thexture.

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture. For deep cleaning, turn off the light

and remove the glass prior to cleaning. Hand wash glass with warm water and mild detergent. Dry with a lint-free or microber cloth.

For Customer Service, contact

the place of purchase to arrange

for replacement parts.

Inhaltsverzeichnis

Seite 1 - FINISHING THE INSTALLATION

Assembly Instructions: 3086-3/6/9 CH (Harland)IMPORTANT: • ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL. • SHUT OFF POWER SUPPLY

Verwandte Modelle: 3086-3 CH

Kommentare zu diesen Handbüchern

Keine Kommentare

Golden-lighting 3086-3/6/9 CH Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Golden-lighting 3086-3/6/9 CH herunter. Golden Lighting 3086-3/6/9 CH User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: 3086-3 CH

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Golden-lighting 3086-3/6/9 CH