Golden-lighting 9942-M1L GL Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Golden-lighting 9942-M1L GL herunter. Golden Lighting 9942-M1L GL User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Assembly Instructions: 9942-M1L GL (Aiyana)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Carefully remove all of the contents from the carton. See the
important notes above. Shut off the power at the circuit breaker
andcompletelyremovetheoldxturefromthewall,including
theoldmountingstrap.
Fromthepartsbagremovethemountingstrapassembly.One
endofnipple(C)shouldbeattachedtomountingstrap(A)witha
washerandhexnutsinplace.Youmayneedtotightenthenuts
thatholdthescrewsinplace.Pullthehousewiresthroughthe
centerofmountingstrap(A).Placemountingstrap(A)overthe
junctionboxandsecureinplacewithmountingscrews(B)anda
screwdriver.Tightenthescrewssecurely.
Bymeasuring,determinethecorrectamountofcablewire
neededforproperhangingheight.Toshortenthexture,trimthe
wirestothedesiredlengthplusatleast8to10inches.Putthe
wirethroughtheholeinthesideofthecanopy.
CONNECTING THE WIRES
Haveanassistantsupportthextureweightwhilecompleting
thewiring.Cutawayanyexcesswires.Threadthexturewires
throughthecanopy.Attachthexture’swirestothepower
supplywiresfromthejunctionbox.Connectblacktoblack(or
smooth);whitetowhite(orribbed);groundtoground(greenor
copper).Twisttheendsofthewirepairstogether,thentwiston
a wire connector. Make sure all twists are in the same direction.
Ifthereisnogroundwire(greenorcopper)fromthejunction
box,locategroundscrew(E)onmountingstrap(A)andwrap
thexturegroundwirearoundthegreengroundscrew(E).Use
ascrewdrivertosecuregroundscrew(E)ontothemounting
bracket.Tuckallwiresneatlyintothejunctionbox.
FINISHING THE INSTALLATION
Pushthecanopyuptotheceilingsothatnipple(C)protrudes
throughtheholeinthecanopy.Securethecanopytotheceiling
bythreadingdecorativenut(D)ontothethreadsofnipple(C).
Note:Completethefollowingstepsafterthexturehasbeen
hung.
Installhalogenbulbs,glass(S),andglass(L)inaccordancewith
thediagramabove.
Bulb Note: Use a tissue or paper towel to hold the bulb and
push down into the socket. Oils and dirt can cause the bulb life
toshorten.Rubbingalcoholisrecommendedtocleanthebulbs
when needed.
Your installation is now complete. Turn on the power and test the
xture.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, contact
the place of purchase to arrange
for replacement parts.
BLACK
(Hot)
WHITE
(Neutral)
GREEN
(Ground)
HOUSE WIRES
SMOOTH
(Or Black)
FIXTURE WIRES
RIBBED
(Or White)
BARE COPPER
(Or Green)
S
S
S
S
S
TOTAL
4PCS
L
TOTAL
6PCS
A
B
C
D
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - FINISHING THE INSTALLATION

Assembly Instructions: 9942-M1L GL (Aiyana)IMPORTANT: • ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL. • SHUT OFF POWER SUPPLY AT

Kommentare zu diesen Handbüchern

Keine Kommentare